Frequently Asked Questions?


How should boiler maintenance be?

You should have your boiler maintenance done in summer before entering the winter so that your boiler can be ready for the difficult winter marathon. If your boiler has not been serviced for a long time, the main parts that provide heating and savings should be disassembled and cleaned. To explain the subject a little more;
It is necessary to eliminate lime and other factors that reduce the temperature of the hot water in the boiler. The main exchanger of the boiler heats the lime instead of heating the water by forming a lime shell after a while due to the abundant lime in the city water line. It is necessary to purify the main heat exchanger from these lime with strong acids.
The fan motor, which provides the removal of the raw gas, that is, the burnt gas, on the upper side of the boiler must be purified from the dirt and dust accumulated in it. If it is not cleaned, a disturbing sound starts to emerge from this part after a while.
The hot water sensor and the sensors that adjust the core temperature should be renewed.
The internal seats of the 3-way valve group must be replaced.
The part called the plate heat exchanger must be cleaned with acids.
If there is a problem in the inner bearing, it should be changed in the inner bearing to remove the dirt in the circulation pump.
Dust, dirt, lint, etc. in the boiler. The device should be completely cleaned from any external factors that may cause various flammable life and property losses.
These listed items should be done in boiler maintenance. . In workshop maintenance, all parts are removed so that there are no parts left in the main body of the boiler, and the device is collected again by cleaning with the necessary cleaning products (acids, oil dissolving chemicals, etc.). The collected device is tested for a few days, runs smoothly to the boiler user and is delivered with a performance like the first day. It is also worth mentioning that do not hand over your device to people who do not have an office and do not pay tax. Otherwise, instead of doing workshop maintenance, they will take your boiler to a car wash and polish it nicely.


The boiler’s bar indicator keeps changing?

You will encounter this malfunction because the gas in the tank at the back of the boiler runs out. Gas is pumped to every boiler that is normally maintained. If you are faced with this failure, it means that you do not have your boiler serviced for a long time. A certain amount of gas must be injected into your device. If the balloon inside your expansion tank is a hole, the expansion tank needs to be replaced. It is present in some parts that may cause bar replacement. Filler tap left open or broken, plate heat exchanger or main heat exchanger ruptured.


What should I do first when my boiler fails?

The reset button on the devices is designed to remove the malfunctioning combi boiler and to ensure its operation. This reset button does not cause any malfunctions in the parts, and enables the device to work again by using it in cases such as the electricity is unstable, the water decreases, the gas runs out or does not come.
Does using a room thermostat save gas?
Room thermostats allow the boiler to operate at ambient temperature and at desired times. It makes sense to use it with suitable environment and insulation.
You should have your boiler maintenance done in summer before entering the winter so that your boiler can be ready for the difficult winter marathon. If your boiler has not been serviced for a long time, the main parts that provide heating and savings should be disassembled and cleaned. To explain the subject a little more;
It is necessary to eliminate lime and other factors that reduce the temperature of the hot water in the boiler. The main exchanger of the boiler heats the lime instead of heating the water by forming a lime shell after a while due to the abundant lime in the city water line. It is necessary to purify the main heat exchanger from these lime with strong acids.
The fan motor, which provides the removal of the raw gas, that is, the burnt gas, on the upper side of the boiler must be purified from the dirt and dust accumulated in it. If it is not cleaned, a disturbing sound starts to emerge from this part after a while.
The hot water sensor and the sensors that adjust the core temperature should be renewed.
The internal seats of the 3-way valve group must be replaced.
The part called the plate heat exchanger must be cleaned with acids.
If there is a problem in the inner bearing, it should be changed in the inner bearing to remove the dirt in the circulation pump.
Dust, dirt, lint, etc. in the boiler. The device should be completely cleaned from any external factors that may cause various flammable life and property losses.
These listed items should be done in boiler maintenance. We would like to point out that the maintenance carried out with a fee of 30, 40, 50, 60 TL in the market is unnecessary, and there is no maintenance that will relieve you economically such as gas and water. In workshop maintenance, all parts are removed so that there are no parts left in the main body of the boiler, and the device is collected again by cleaning with the necessary cleaning products (acids, oil dissolving chemicals, etc.). The collected device is tested for a few days, runs smoothly to the boiler user and is delivered with a performance like the first day. It is also worth mentioning that do not hand over your device to people who do not have an office and do not pay tax. Otherwise, instead of doing workshop maintenance, they will take your boiler to a car wash and polish it nicely.


The boiler’s bar indicator keeps changing?

You will encounter this malfunction because the gas in the tank at the back of the boiler runs out. Gas is pumped to every boiler that is normally maintained. If you are faced with this failure, it means that you do not have your boiler serviced for a long time. A certain amount of gas must be injected into your device. If the balloon inside your expansion tank is a hole, the expansion tank needs to be replaced. It is present in some parts that may cause bar replacement. Filler tap left open or broken, plate heat exchanger or main heat exchanger ruptured.
What should I do first when my boiler fails?
The reset button on the devices is designed to remove the malfunctioning combi boiler and to ensure its operation. This reset button does not cause any malfunctions in the parts, and enables the device to work again by using it in cases such as the electricity is unstable, the water decreases, the gas runs out or does not come.


Does using a room thermostat save gas?

Room thermostats allow the boiler to operate at ambient temperature and at desired times. It makes sense to use it with suitable environment and insulation.

Leave a Reply

Your email address will not be published. Required fields are marked *